MiniTaps

M.9 / 0.90UNM Thread Bottoming Tap 3 Flute HSS w/TiN #22235

M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming  made of  HSS (High Speed Steel) with TiN coating,  made to DIN standards thread pitch 0.225mm threading length...

M.9 / 0.90UNM Thread Tap Bottoming HSS #22234

M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming,  made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS" hardened high...

M.9 /90 UNM Thread, Pan Head Machine Screw, .050" Length, SS Finish, 100 Count, #10116

Pan Head Machine Screw M.9 / 0.90 UNM, Length .050", Instrument Grade Part Made of Stainless Steel. This is part was made on a precision screw machine and was not cold headed. Traceable and with...

M.9 Roll Form Plug Tap for Aluminum & Magnesium #22136

M.9 Tap Roll Form Plug For Thread Forming in Aluminum or Magnesium Pitch .225mm Threading Length Approximate 4.0mm /0.160” Shank 0.060" Made From Hardened High Speed Steel Designed for...

M.9 x .225mm (0.90 UNM) Left Hand Plug Tap, 3 Flute, HSS with TiN Coating, #22321

M.9 Tap (.90 UNM) Tap “LEFT HAND” 3 Flute Plug TiN (Titanium Nitride) Coating Made to DIN Standards Thread Pitch 0.225mm Threading Length Approximately 3.5mm / 0.150” Shank...

M0.9 x 1.0mm Pan Head Machine Screw SS 100 count #10134

Pan Head Machine Screw Thread M.9 (90UNM), 1mm [.040"] Threaded Length Instrument grade part made of stainless steel. Made on a precision screw machine and not cold headed. Traceable and with...

M1 & 1.00UNM Tap Bottoming 3 Flute HSS w/TiN #22245

Low stock, if out of stock our lead time is 1-3 weeks  M1.0 Tap, aka: M1 & 1.00UNM Tap design:  3 flute Plug with TiN coating made to DIN standards Size M1.0 thread pitch 0.25mm...

M1 X 3mm Machine Screw Slotted Philips Stainless Steel, 100 Count #11511

Machine Screw Pan Head Slotted with Phillips (Cross-Recess) Drive Thread M1.0 (1.00UNM,) .25 Pitch Threaded Length 3.0mm Overall Length 3.8mm Head 1.8mm Stainless Steel, Silver Finish. Made...

M1 X 4mm Machine Screw Slotted Philips Stainless Steel, 100 Count #11513

Machine Screw Pan Head Slotted with Phillips (Cross-Recess) Drive Thread M1.0 (1.00UNM,) .25 Pitch Threaded Length 4.0mm Overall Length 4.8mm Head 1.8mm Stainless Steel, Silver Finish. Made...

M1.0 (1.00 UNM) Thread Plug Tap, 2 Spiral Flute, HSS, #22314

M1.0 / 1.00UNM, Thread Tap, Picture is of another smaller size Spiral 2 Flute Plug Thread Pitch .25mm Length of Cut Approx. 5mm / .200" Made to DIN Standards Shank 0.060" Made from...

M1.0 X .20mm Tap Plug 3 Flute HSS #22248

M1 x .20mm Tap 3 Flute Plug Made to DIN Standards Thread Pitch 0.20mm "Special Pitch" Threading Length Approximate 4.0mm Shank 1.5mm / 0.060" Made from Hardened High Speed Steel Designed for...

M1.0 (1.00 UNM) Left Hand Plug Tap, HSS with TiN Coating, #22331

M1.0 Tap (1.00 UNM) Tap “LEFT HAND”  3 Flute Plug TiN (Titanium Nitride) Coating Made to DIN Standards Thread Pitch 0.25mm Threading Length Approximately 4.0mm / 0...