Created with Sketch. Created with Sketch.
Toggle menu
Ph: 760-723-9900 (Seattle, WA, USA)

Shop by Category

M.9 Tap & .90UNM Tap

M.9 Tap & .90UNM Tap Right Hand, Pitch .225mm 113-TPI

  • M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Plug made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS"  hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills.  Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces. M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Plug made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS"  hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills.  Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces.

    M.9 & .90 UNM Plug Tap HSS #2230

    M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Plug made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS"  hardened high speed steel our taps are designed for production taping in...

    $33.50
  • M.90 Tap, aka: M.9 & .90UNM Tap design:  2 flute Plug made to DIN, M(S) ISO 2 (3G) standards thread pitch 0.225mm threading length approximate 5.0mm, Shank 0.060" made from "HSS"  hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills.  Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces

    M.9 & .90 UNM Tap Plug Tap 2 Flute HSS #2238

    M.90 Tap, aka: M.9 & .90UNM Tap design:  2 flute Plug made to DIN, M(S) ISO 2 (3G) standards thread pitch 0.225mm threading length approximate 5.0mm, Shank 0.060" made from "HSS"  hardened high speed steel our taps are designed for...

    $33.50
    Add to Cart
  • M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming  made of  HSS (High Speed Steel) with TiN coating,  made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills.  The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life.  In our shop TiN coated taps typically tapped three times the number of holes.  Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

    M.9 & 0.90UNM Tap Bottoming 3 Flute HSS w/TiN #2235

    M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming  made of  HSS (High Speed Steel) with TiN coating,  made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from hardened high...

    $36.00
  • M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming,  made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS" hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills.  Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches.  Please note this tap's Bottoming design has short lead, about three threads and it has a flat on its end.  Price listed is for 1 to 9 pieces. M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming,  made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS" hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills.  Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches.  Please note this tap's Bottoming design has short lead, about three threads and it has a flat on its end.  Price listed is for 1 to 9 pieces.

    M.9 & 0.90UNM Tap Bottoming HSS #2234

    M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming,  made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS" hardened high speed steel our taps are designed for production taping...

    $33.50
    Add to Cart
  • M.9 Tap, aka: .90UNM Tap design:  3 flute Plug with TiN coating made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life.  In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm (0.984") threaded length (tip to end of thread) 4.00mm (0.160") lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces.

    M.9 & 90UNM Plug Tap w/TiN #2231

    Sorry this item is out of stock until middle to late May. M.9 Tap, aka: .90UNM Tap design:  3 flute Plug with TiN coating made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed...

    $36.00
  • M.9 Tap, aka: .90UNM Tap design:  2 flute Plug with TiN coating made to DIN standards thread pitch 0.225mm threading length approximate  5.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life.  In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm (0.984") threaded length (tip to end of thread) 5mm (0.2") lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces.  Please note the image is of a similar tap and not this specific tap a new photo will be updated later.

    M.9 & 90UNM Tap Plug 2 Flute HSS w/TiN

    M.9 Tap, aka: .90UNM Tap design:  2 flute Plug with TiN coating made to DIN standards thread pitch 0.225mm threading length approximate 5mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in...

    $36.00
  • M.9 & 90UNM Tap; Spiral two flute Plug pitch .225mm length of cut approx. 4mm .160; To DIN Standards Shank 0.060" made from hardened high speed steel our taps are designed for pulling the chips away from the cutting edge while tapping blind or through holes suitable for production tapping of softer materials such as brass, copper, aluminum, plastic  or similar. Image is representative and may not be exact item.  This is a production tap for tapping in Automatic screw machines, tappers, CNC lathes and CNC mills.

    M.9 & 90UNM Tap Plug 2 Spiral Flutes HSS #2232

    M.9 & 90UNM Tap; Spiral two flute Plug pitch .225mm length of cut approx. 4mm .160; To DIN Standards Shank 0.060" made from hardened high speed steel our taps are designed for pulling the chips away from the cutting edge while tapping blind or...

    $22.00
    Add to Cart
  •  M.9 aka: .90UNM Tap Roll form Plug; to DIN standards Size M.9 pitch .225mm threading length approximate 4.0mm /0.160”, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills.  Image is representative of the item for sales. Overall length of Tap is 25mm (0.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces.

    M.9 & 90UNM Tap Plug Roll Form HSS #2236

       M.9 aka: .90UNM Tap Roll form Plug; to DIN standards Size M.9 pitch .225mm threading length approximate 4.0mm /0.160”, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw...

    $39.50
    Add to Cart