M1.0 Tap & 1.00UNM Tap

M1 & 1.00UNM Tap Bottoming 3 Flute HSS w/TiN #22245

Low stock, if out of stock our lead time is 1-3 weeks  M1.0 Tap, aka: M1 & 1.00UNM Tap design:  3 flute Plug with TiN coating made to DIN standards Size M1.0 thread pitch 0.25mm threading length approximate 5mm, Shank 0.060" made from...

M1.0 (1.00 UNM) Thread Plug Tap, 2 Spiral Flute, HSS, #22314

M1.0 / 1.00UNM, Thread Tap, Picture is of another smaller size Spiral 2 Flute Plug Thread Pitch .25mm Length of Cut Approx. 5mm / .200" Made to DIN Standards Shank 0.060" Made from Hardened HSS (High Speed Steel) Designed for pulling the...

M1.0 X .20mm Tap Plug 3 Flute HSS #22248

M1 x .20mm Tap 3 Flute Plug Made to DIN Standards Thread Pitch 0.20mm "Special Pitch" Threading Length Approximate 4.0mm Shank 1.5mm / 0.060" Made from Hardened High Speed Steel Designed for production taping in automatic screw machines,...

M1.0 (1.00 UNM) Thread Plug Tap, 2 Flute, HSS with TiN Coating, #22243

M1.0 (1.00 UNM) Thread Tap 2 Flute Plug TiN (Titanium Nitride) Coating Made to DIN Standards Thread Pitch 0.25mm Threading Length Approximate 5mm Shank 1.5mm / 0.060" Made from Hardened High Speed Steel Designed for production tapping in...

M1.0 (1.00 UNM) Thread Plug Tap, 3 Flute, HSS with TiN Coating #22241

M1.0 (1.00 UNM) Thread Tap 3 Flute Plug TiN (Titanium Nitride) Coating Made to DIN Standards Thread Pitch 0.25mm Threading Length Approximate 4.0mm Shank 0.060" Made from Hardened High Speed Steel Designed for production tapping in automatic...

M1.0 (1.00 UNM) Thread Plug Tap, Roll Form, HSS, #22246

M1.0 (1.00 UNM) Thread Tap Roll Form  Made to DIN Standards Thread Pitch .25mm Threading Length Approximately 4.0mm / 0.160” Shank 0.060" Made from Hardened High Speed Steel Designed for production tapping in automatic screw machines,...

M1.0 (1.00 UNM) Thread Plug Tap, Roll Form, HSS, with TiN Coating #22247

M1.0 (1.00 UNM) Thread Tap Roll Form Plug TiN (Titanium Nitride) Coating Made to DIN standards Thread Pitch .25mm Threading Length Approximate 4.0mm / 0.160” Shank 0.060" Made from Hardened High Speed Steel Designed for production taping...

M1.0 / 1.00 UNM Tap Bottoming 3 flute HSS #22244

M1 Tap, aka: M1.0 & 1.00UNM Tap design:  3 flute Bottoming made to DIN standards thread pitch 0.250mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic...

M1.0 Thread x .20mm Pitch Plug Tap, 3 Flute, HSS with TiN Coating, #22249

M1.0 x .20mm Tap 3 Flute Plug Made to DIN Standards Thread Pitch 0.20mm "Non-Standard / Special Pitch" Threading Length Approximate 4.0mm Shank 1.5mm / 0.060" Made from Hardened High Speed Steel Designed for Production Tapping in Automatic...

M1.0 x(1.00 UNM) Thread Plug Tap, 2 Flute, HSS, #22242

M1 (1.00 UNM) Thread Tap 2 Flute Plug Made to ISO Standards Thread Pitch 0.250mm Threading Length Approximate 4.0mm Shank 0.060" Made from Hardened High Speed Steel Designed for production tapping in automatic screw machines, tappers, CNC...

M1.0 x.25mm & 1.00 UNM Tap Plug 3 Flute HSS #22240

M1 Tap, aka: M1.0 x.25mm ISO 2(3G)  & 1.00UNM Tap design:  3 flute Plug made to ISO standards thread pitch 0.250mm threading length approximate 4.0mm, Shank 0.060" made from hardened high-speed steel our taps are designed for production...