Created with Sketch. Created with Sketch.
Toggle menu
Ph: 760-723-9900 (Seattle, WA, USA)

Shop by Category

M1.7 Tap

M1.7 Tap Right Hand, Pitch .35mm

  • M1.7 Tap, design:  3 flute Plug style with TiN coating made to ISO standards thread pitch 0.35mm threading length approximate 6.0mm / 0.240” , Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life.  In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 33mm  / 1.300" threaded length (tip to end of thread) 6.00mm (0.240") lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces.

    M1.7 x.35mm Tap Plug 3 Flute HSS w/TiN #2301

     M1.7 Tap, design:  3 flute Plug style with TiN coating made to DIN standards thread pitch 0.35mm threading length approximate 6.0mm / 0.240” , Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production...

    $29.00
    Add to Cart
  • M1.7 Tap Roll form Plug also call thread forming Tap; Thread pitch .35mm, to ISO standards Shank 2.0mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plug produces no burrs or chips in production taping. Often well suited for materials like aluminum, copper, brass stainless steel in the 300 series in part production on automatic screw machines, CNC mills and lathes.

    M1.7 x.35mm Tap Plug Roll Form HSS #2306

    M1.7 Tap Roll form Plug also call thread forming Tap; Thread pitch .35mm, to ISO standards Shank 2.0mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll...

    $29.50
    Add to Cart
  • #02307  M1.7 Tap Roll form Plug also call thread forming Tap; Thread pitch .35mm, to DIN standards Shank 2.0mm made from hardened high speed steel. This tap has been coated with TiN  which can increase toll life and overall performance three full.  Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plug produces no burrs or chips in production taping. Often well suited for materials like aluminum, copper, brass stainless steel in the 300 series in part production on automatic screw machines, CNC mills and lathes.

    M1.7 x.35mm Tap Plug Roll Form HSS w/TiN #2307

    #2307  M1.7 Tap Roll form Plug also call thread forming Tap; Thread pitch .35mm, to ISO standards Shank 2.0mm made from hardened high speed steel. This tap has been coated with TiN  which can increase toll life and overall performance three...

    $32.50
    Add to Cart