MiniTaps

Drill bits Metric 1.25mm to 2.50mm

Drill bit Sizes:  Metric sizes 1.25mm to 2.50mm  Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length 38mm...

Drill bits Wire Sizes #77 to #41

Drill bit Sizes:  Wire sizes #77 to #45  Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length 38mm /1...

Gages Plug Go M.9 .90UNM #32541

#02541 Metric Thread Plug Gage M.90 /  90UNM pitch .225mm; In a single handle Go member Precision Thread Gage made of High Speed Steel then hardened. Picture is representative of part,  We...

Holder for Roll dies with 6mm OD, HSS #28511

Limied stock one unit, Lead time for this item is 2-4 weeks and price is last estimate Holder for Roll Dies with 6.0mm outside housing diameter generally fitting thread sizes M.3 to M.7...

Holder for Roll dies with 8mm OD, HSS #28509

"Special Order" if listed as Pre-Order, lead time 2- 4 weeks.  Holder for Roll Dies with 8.0mm outside housing diameter, fitting thread sizes M.8 to M1.3 Non-Adjustable, HSS for die Body...

M.3 x.08 (.30UNM) Bottoming Tap, 3 Flute, HSS w/TiN Coating #22193

M.30 Tap, aka: M.3 & .30UNM 3 Flute Bottoming TiN (Titanium Nitride) Coating Made to DIN Standards Thread Pitch 0.08mm Threading Length Approximate 2.mm Shank 0.039" Made from Hardened...

M.3 x.08 (.30UNM) Plug Tap, 3 Flute, HSS w/TiN Coating #2191

M.30 Tap, aka: M.3 & .30UNM 3 Flute Plug TiN (Titanium Nitride) Coating Made to DIN Standards Thread Pitch 0.08mm Threading Length Approximate 2.mm Shank 0.039" Made from Hardened High...

M.30 / 0.30 UNM Plug Tap, 2 Flute, HSS #22186

M.30 Tap (0.30UNM) 2 Flute Plug Made from High Speed Steel (HSS) Made to ISO standards Thread Pitch 0.080mm Threading Length Approximate 1.50mm Shank 0.039" Designed for Production Tapping...

M.30 / 0.30 UNM Plug Tap, 3 Flute, HSS #22190

M.30 Tap (0.30UNM) 3 Flute Plug Made from High-Speed Steel (HSS) Made to ISO standards Thread Pitch 0.080mm Threading Length Approximate 1.50mm Shank 0.039" Designed for Production Tapping...

M.30 / 0.30 UNM Roll Former Tap, HSS #22188

M.30 Tap (0.30UNM) Roll Thread Former Plug Made from High Speed Steel (HSS) Made to ISO standards Thread Pitch 0.080mm Threading Length Approximate 1.50mm Shank 0.039" Designed for...

M.35 / 0.35 UNM Plug Tap, 3 Flute, HSS #22196

M.35 Tap (0.35UNM) 3 Flute Plug Made from High Speed Steel (HSS) Made to ISO standards Thread Pitch 0.090mm Threading Length Approximate 1.50mm Shank 0.039" Designed for Production Tapping...

M.35 x .090mm (.35UNM) Plug Tap, 3 Flute, HSS w/TiN Coating #22197

M.35 Tap (0.35UNM) 3 Flute Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch 0.09mm Threading Length Approximate 2.5mm Shank 0.039" Made from Hardened High Speed...