Created with Sketch. Created with Sketch.
Toggle menu
Ph: 760-723-9900 (Seattle, WA, USA)

Shop by Category

M.8 Tap & .80UNM Tap

 M.8 Tap & .80UNM Tap Right Hand, Pitch .200mm 127-TPI

  • M.80 Tap, aka: M.8 & .80UNM Tap design:  2 flute Plug made to DIN, M(S) ISO 2 (3G) standards thread pitch 0.20mm threading length approximate 4.0mm, Shank 0.060" made from "HSS"  hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills.  Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces

    M.8 & .80 UNM Plug Tap 2 Flute HSS #2222

    M.80 Tap, aka: M.8 & .80UNM Tap design:  2 flute Plug made to DIN, M(S) ISO 2 (3G) standards thread pitch 0.20mm threading length approximate 4.0mm, Shank 0.060" made from "HSS"  hardened high speed steel our taps are designed for...

    $33.50
    Add to Cart
  • M.8 Tap, aka: 0.80UNM Tap design:  Roll Form Plug with TiN coating made to ISO 2 (3G) standards thread pitch 0.200mm threading length approximate 3.0mm, Shank 1.50mm (0.060") made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life.  In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm (0.984") threaded length (tip to end of thread) 3.00mm (0.120") Shank diameter is 1.50mm.  Please note that lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces.

    M.8 & .80UNM Tap Roll Form Plug HSS w/TiN #2227

     M.8 Tap, aka: 0.80UNM Tap design:  Roll Form Plug with TiN coating made to ISO 2 (3G) standards thread pitch 0.200mm threading length approximate 3.0mm, Shank 1.50mm (0.060") made from hardened high speed steel our taps are designed for...

    $42.00
  • M.80 Tap, aka: M.8 & 0.80UNM Tap design:  3 flute Bottoming  made of  HSS (High Speed Steel) with TiN coating,  made to DIN standards thread pitch 0.20mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills.  The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life.  In our shop TiN coated taps typically tapped three times the number of holes.  Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

    M.8 & 0.80UNM Tap Bottoming 3 Flute HSS w/TiN #2225

    M.80 Tap, aka: M.8 & 0.80UNM Tap design:  3 flute Bottoming  made of  HSS (High Speed Steel) with TiN coating,  made to ISO 2 (3G) standards thread pitch 0.20mm threading length approximate 4.0mm, Shank 0.060" made from hardened...

    $36.00
  • M.8 Tap Roll form Plug aka: 0.80UNM; to ISO 2 (3G) standards Size M.8 pitch .200mm threading length approximate 3.00mm (0.120”), Shank diameter 1.50mm Tap made from hardened high speed steel.  Our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills.  Image is representative of the item for sales. Overall length of Tap is 25mm (0.984") threaded length (tip to end of thread) 3.0mm (0.120") shank diameter 1.50mm please lengths can vary slightly between batches.

    M.8 & 80UNM Roll form Plug Tap HSS #2226

     M.8 Tap Roll form Plug aka: 0.80UNM; to ISO 2 (3G) standards Size M.8 pitch .200mm threading length approximate 3.00mm (0.120”), Shank diameter 1.50mm Tap made from hardened high speed steel. Our taps are designed for production taping in...

    $39.50
  • M.8 Tap, aka: .80UNM Tap design:  3 flute Plug with TiN coating made to DIN standards thread pitch 0.20mm threading length approximate 3.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life.  In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm (0.984") threaded length (tip to end of thread) 3.70mm (0.145") lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces.

    Tap Plug 3 flute M.8 x.20 also .80UNM HSS w/TiN #2221

    M.8 Tap, aka: .80UNM Tap design:  3 flute Plug with TiN coating made to DIN standards thread pitch 0.20mm threading length approximate 3.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic...

    $36.00
  • M.8 Tap, aka: .80UNM Tap design:  2 flute Plug with TiN coating made to DIN standards thread pitch 0.20mm threading length approximate 3.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life.  In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm (0.984") threaded length (tip to end of thread) 5mm (0.2") lengths can vary slightly between batches.  Price listed is for 1 to 9 pieces.

    Tap Plug M.8 x.20 2 Flute also 0.80UNM HSS w/TiN #2223

    M.8 Tap, aka: .80UNM Tap design:  2 flute Plug with TiN coating made to DIN standards thread pitch 0.20mm threading length approximate 3.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in...

    $36.00