Created with Sketch. Created with Sketch.
Toggle menu
Ph: 760-723-9900 (Seattle, WA, USA)

Shop by Category

  • Screws Metric
  • Taps Metric M Right Hand
  • Taps Metric S series NIHS
  • Taps Metric Left Hand
  • Taps Inch ANSI/ASTM
  • Screws Inch to ANSI/ASME
  • Hex & Acorn Nuts & Washers
  • Drill Bits: Wire & Metric
  • Gages
  • Dies: for Miniature Threads
  • Tools

    • Shop by Brand

  • MiniTaps
  • Tabco
  • View all Brands
  • Screws Metric
  • Taps Metric M Right Hand
  • Taps Metric S series NIHS
  • Taps Metric Left Hand
  • Taps Inch ANSI/ASTM
  • Screws Inch to ANSI/ASME
  • Hex & Acorn Nuts & Washers
  • Drill Bits: Wire & Metric
  • Gages
  • Dies: for Miniature Threads
  • Tools

    • Shop by Brand

  • MiniTaps
  • Tabco
  • View all Brands

    • M.6 Tap & .60UNM Tap

    M.6 Tap & .60UNM Tap Right Hand, Pitch .150mm 169-TPI

    • M.6 Tap Roll form Plug; to DIN standards Size M.6 pitch .15mm threading length approximate 2.5mm, Shank 0.039" or .060" (1.0 or 1.5mm) made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 2.5mm (0.100") lengths can vary slightly between batches. Sample of a M.6 Tap next to a penny the M.5 is smaller!
      Quick view

      M.6 & 0.60 UNM Roll Form Plug Tap HSS #2216

      M.6 Tap Roll form Plug; to DIN standards Size M.6 pitch .15mm threading length approximate 2.5mm, Shank 0.039" or .060"  (1.0 or 1.5mm) made from hardened high speed steel our taps are designed for production taping in Automatic screw machines,...

      $40.50
    • M.6 Tap, aka: M.6 & .60UNM Tap design: 3 flute Plug to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 2.5mm (0.100") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.
      Quick view

      M.6 & 0.60UNM Plug Tap 2 Flute HSS #2210

       M.6 Tap, aka: M.6 & .60UNM Tap design:  3 flute Plug to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw...

      $37.50
    • M.60 Tap, aka: 0.60UNM Tap design: 3 flute Bottoming made of HSS (High Speed Steel) made to ISO standards thread pitch 0.15mm threading length approximate 3.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 22mm (.870") threaded length (tip to end of thread) 3.0mm (0.120") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.
      Quick view

      M.6 & 0.60UNM Tap Bottoming 3 Flute HSS #2214

      M.60 Tap, aka: 0.60UNM Tap design:  3 flute Bottoming  made of  HSS (High Speed Steel) made to ISO standards thread pitch 0.15mm threading length approximate 3.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for...

      $37.50
      Add to Cart
    • M.60 Tap, 0.60UNM Tap design: 3 flute Bottoming made of HSS (High Speed Steel) with TiN coating, made to ISO standards thread pitch 0.150mm threading length approximate 3.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Image is representative of the item for sales. Overall length of Tap is 22mm (.870") threaded length (tip to end of thread) 3.0mm (0.120") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces. M.6 & 0.60UNM Tap Bottoming 3 Flute HSS w/TiN #2215
      Quick view

      M.6 & 0.60UNM Tap Bottoming 3 Flute HSS w/TiN #2215

      M.60 Tap, aka: 0.60UNM Tap design:  3 flute Bottoming  made of  HSS (High Speed Steel) with TiN coating,  made to ISO standards thread pitch 0.15mm threading length approximate 3.0mm, Shank 0.060" made from hardened high speed steel...

      $40.50
    • M.6 aka: .60UNM Tap Roll form Plug; w/TiN to ISO standards Size M.6 pitch .15mm threading length approximate 2.5mm /0.100”, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Image is representative similar to the item listed here. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 3.0mm (0.120") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.
      Quick view

      M.6 & 60UNM Tap Roll Form Plug HSS w/TiN #2217

      M.6 aka: .60UNM Tap Roll form Plug; w/TiN to ISO standards Size M.6 pitch .15mm threading length approximate 2.5mm /0.100”, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines,...

      $43.00
    • M.60 Tap, aka: M.6 & .60UNM Tap design: 2 flute Plug to DIN standards thread pitch 0.125mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image of 3 flute version new picture coming. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 4mm (0.16") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces. Sample of a M.6 Tap next to a penny
      Quick view

      M6 & 0.60 UNM Plug Tap 2 Flute HSS #2212

      M.6 Tap, aka: M.6 & .60UNM Tap design:  2 flute Plug made from high speed steel (HSS) to DIN standards thread pitch 0.15mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for production...

      $37.50
      Add to Cart
    • #02211 M.60 Tap, aka: M.6 & .60UNM Tap design: 3 flute Plug w/TiN coating made to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin, increases tap performance and tool life. In our shop coated taps typically tapped three times the number of holes compared to uncoated. Image is representative of the item for sales. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 2.5mm (0.100") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces. M.6 tap size compared to a penny
      Quick view

      Tap Plug 3 flute M.6 x.15mm also .60UNM HSS w/TiN #2211

      #02211  M.60 Tap, aka: M.6 & .60UNM Tap design:  3 flute Plug w/TiN coating made to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for...

      $40.00
    • #02213 M.60 Tap, aka: M.6 & .60UNM Tap design: 2 flute Plug w/TiN coating made to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin, increases tap performance and tool life. In our shop coated taps typically tapped three times the number of holes compared to uncoated. Image is similar tap and not this specific tap. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 4mm (0.16") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces. M.6 tap size compared to a penny
      Quick view

      Tap Plug M.6 x.15mm 2 Flute 0.60UNM HSS w/TiN #2213

      #02213  M.60 Tap, aka: M.6 & .60UNM Tap design:  3 flute Plug w/TiN coating made to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for...

      $40.00
    Compare Selected