MiniTaps

Drill bit 2.26mm #43

Drill bit Size:  2.26mm  also #43      Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length...

Drill bit 2.30mm

Drill bit Size:  2.30mm       Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length 38mm /1...

Drill bit 2.37mm #42

Drill bit Size:  2.37mm  #42      Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length 38mm...

Drill bit 2.40mm

Drill bit Size:  2.40mm       Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length 38mm /1...

Drill bit 2.44mm #41

Drill bit Size:  2.44mm also #41       Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length...

Drill bit 2.45mm .0965"

Drill bit Size:  2.45mm  .0965"       Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall...

Drill bit 2.50mm

Drill bit Size:  2.50mm       Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length 38mm /1...

Drill Bits Inch Sizes .020 to .098"

Drill bit Sizes:  Inch sizes .020" to .098"  Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length 38mm /1...

Drill bits Metric 0.50mm to 1.20mm

Drill bit Sizes:  Metric  .50mm to1.20mm  Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length 38mm /1...

Drill bits Metric 1.25mm to 2.50mm

Drill bit Sizes:  Metric sizes 1.25mm to 2.50mm  Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length 38mm...

Drill bits Wire Sizes #77 to #41

Drill bit Sizes:  Wire sizes #77 to #45  Flute length: sizes .50 to .65mm 8.90mm, sizes .70 to 2.50mm 10.50mm Drill Point 135°, Shank .125” / 3.18mm,Overall length 38mm /1...

Gages Plug Go M.9 .90UNM #32541

#02541 Metric Thread Plug Gage M.90 /  90UNM pitch .225mm; In a single handle Go member Precision Thread Gage made of High Speed Steel then hardened. Picture is representative of part,  We...