MiniTaps

M1.5 Thread Ring Gage, HSS Set Go & No-Go #32510

Metric Thread Ring Gage M1.5 x .30 pitch Set Go and No-Go; Precision Thread Gage made of High Speed Steel then hardened. Picture is of part, Made for us in Switzerland.

M1.6 x 9mm Machine Screw, Nickel Silver, 100 Count #10432

Machine Screw, Pan Head, Special, Thread M1.6  Pitch .35mm Head diameter 2.5mm Threaded Length 9.0mm  Overall Length 10.0mm Material Nickel Silver; a copper alloy superior to brass...

M1.6 Thread Bottoming Tap HSS #22274

 M1.6 Tap 3 Flute Plug Bottoming Made to DIN Standards Thread Pitch 0.35mm Threading Length Approximate 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed...

M1.6 Thread x .20mm Pitch Plug Tap, HSS, #22272

M1.6 x.20mm Class of Fit ISO 2(4G, 5H) Plug 3 Flute Made to ISO Standards Thread Pitch 0.20mm (SPECIAL, Non-Standard Pitch) Threading Length Approximately 6.0mm / 0.240” Shank 2.0mm / 0...

M1.6 Thread x .35mm Left Hand Plug Tap, HSS with TiN Coating, #22353

M1.6 Tap x .35mm Thread Pitch “LEFT HAND” 3 Flute Plug TiN (Titanium Nitride) Coating Made to DIN Standards Thread Pitch 0.30mm Threading Length Approximately 5.0mm / 0...

M1.6 Thread x .35mm Pitch Bottoming Tap, 3 Flute, HSS with TiN Coating, #22275

M1.6 Tap 3 Flute Bottoming Made to ISO Standards Thread Pitch 0.35mm Threading Length Approximately 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed Steel TiN...

M1.6 Thread x .35mm Pitch Plug Tap, Roll Form, HSS with TiN #22277

M1.6 Tap Roll Form Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch .35mm Threading Length Approximately 6.0mm / 0.240” Shank 2mm /0.78" Made from Hardened High...

M1.6 Thread x .35mm Pitch Plug Tap, Roll Form, HSS, #22276

M1.6 Tap Roll Form Plug Made to DIN standards Thread Pitch .35mm Threading Length Approximately 6.0mm / 0.240” Shank 2mm /0.78" Made from Hardened High Speed Steel Designed for...

M1.6 Thread x.35mm Pitch Plug Tap, 3 Flute, HSS with TiN Coating, #22271

Very Limited Stock M1.6 Tap 3 Flute Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch 0.35mm Threading Length Approximately 6.0mm / 0.240” Shank 2.0mm / 0...

M1.6 Thread x.35mm Pitch Plug Tap, 3 Flute, HSS, #22270

M1.6 Tap 3 Flute Plug Made to ISO Standards Thread Pitch 0.35mm Threading Length Approximate 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed Steel Designed for...

M1.6 x .35mm Plug Tap, 3 Flute, Left Hand, HSS, #22352

M1.6 Tap “LEFT HAND” Thread 3 Flute Plug Made to ISO Standards Thread Pitch 0.35mm Threading Length Approximately 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened...

M1.6 x 2.4mm Machine Screw Stainless Steel, 100 Count #11855

Machine Screw Special, Small Head Thread M1.6 (1.60UNM) Pitch .35mm Overall Length (OAL) 3.0mm Threaded Length (Shank) 2.4mm Head 2.2mm (Thread major on low end of limit gages OK Go Gage and...