• #22193 M.30 Tap, aka: M.3 & .30UNM Tap design: 3 flute Bottoming with TiN coating made to DIN standards thread pitch 0.08mm threading length approximate 2.mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes compared to uncoated. Image is representative of the item for sales. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 2.mm (0.078") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.
  • #22193 M.30 Tap, aka: M.3 & .30UNM Tap design: 3 flute Bottoming with TiN coating made to DIN standards thread pitch 0.08mm threading length approximate 2.mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes compared to uncoated. Image is representative of the item for sales. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 2.mm (0.078") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

    • M.3 x.08 (.30UNM) Bottoming Tap, 3 Flute, HSS w/TiN Coating #22193

    MiniTaps

    $61.95
    (No reviews yet) Write a Review
    SKU:
    22193
    Weight:
    1.00 Ounces
    Shipping:
    Calculated at Checkout
    Bulk Pricing:
    Buy in bulk and save

    Bulk discount rates

    Below are the available bulk discount rates for each individual item when you purchase a certain amount

    • Buy 10 - 24 and get 10% off

    Product Description

    • M.30 Tap, aka: M.3 & .30UNM
    • 3 Flute Bottoming
    • TiN (Titanium Nitride) Coating
    • Made to DIN Standards
    • Thread Pitch 0.08mm
    • Threading Length Approximate 2.mm
    • Shank 0.039"
    • Made from Hardened High Speed Steel
    • Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills.
    • The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes compared to uncoated.
    • Overall length of tap is 22mm (0.870") threaded length (tip to end of thread) 2.mm (0.079"). Lengths can vary slightly between batches.
    • Price listed is for 1 to 9 pieces.

    Product Videos

    Custom Field

    Product Reviews

    Write a Review